CN / EN

3D contest's virtual scene & simulation (robot control) review meeting succeeded.

Source:
2024 Sep. 14


To promote metaverse techs like digital human, virtual scene & simulation, and UAV control. Provide a platform. On Mar. 28, the review meeting of the special event of "National 3D Contest 16th Anniversary Elite League (2023-2024)" on virtual scene & simulation (robot motion control) jointly held by organizers and a company was successfully held in Beijing Starlight Film and Television Park.



Liu Xiaoqing, deputy secretary-general of the Organizing Committee of National 3D Digital Innovation Design Contest and executive vice president of 3D Power; Wang Feiyue, director of State Key Laboratory of Management and Control for Complex Systems, researcher at Institute of Automation, Chinese Academy of Sciences, and supervisor of Chinese Association of Automation; Na Jing, professor at School of Mechanical and Electrical Engineering, Kunming University of Science and Technology, and director of Intelligent Control Institute for Complex Electromechanical Systems; Li Weiguo, director of National Demonstration Center for Experimental Engineering Training, Taiyuan University of Technology, and member of Engineering Training Teaching Steering Committee of Ministry of Education; Qi Haitao, deputy director of Engineering Training Center, Beihang University, and deputy director of Virtual Teaching and Research Office of Engineering Training Courses of Ministry of Education. More than ten experts from universities and industries such as Institute of Automation, Chinese Academy of Sciences, Beijing Institute of Technology, Shandong University, Beijing University of Posts and Telecommunications, College of Mechanical and Vehicle Engineering, Hunan University, Wuhan University of Technology, Southeast University, Beijing Xaircraft Intelligent Technology Co., Ltd., and leaders such as Zhang Haiwei, chairman of Shanghai Qingtong Vision Technology Co., Ltd., and Hu Shihao, sales director attended the review meeting. The meeting was chaired by Zeng Ting, marketing director of Shanghai Qingtong Vision Technology Co., Ltd.

The review meeting was chaired by Zeng Ting, marketing director of Shanghai Qingtong Vision Technology Co., Ltd.


Zhang Haiwei warmly welcomed the leaders and experts. He said that the entertainment-oriented event of the special event on virtual scene creation and virtual simulation of the National 3D Contest is in full swing, and the scientific research direction, as an important part of the special event, will also start soon. He hopes that through this review meeting, strict, detailed and applicable competition rules can be formulated to provide a stage for fair competition and talent display for contestants and make sufficient preparations for the start of the event in the direction of robot motion control. At the same time, as the technical support unit of this contest, it will do its best to provide the most professional and advanced technical support and services for the successful holding of this contest.

Zhang Haiwei, chairman of Shanghai Qingtong Vision Technology Co., Ltd.


Liu Xiaoqing said that as a domestic A-level event, the 3D Contest has more than 600 participating universities and more than 1,000 participating enterprises every year. The cumulative number of participants in the preliminary rounds has exceeded 8 million. Its influence and importance are self-evident. In recent years, the field of robots in the scientific research direction has attracted much attention. At this year's two sessions, artificial intelligence + and new-quality productive forces have become hot topics. Therefore, the discussion on the competition rules of this event is extremely meaningful. It is hoped to create a new platform integrating competition education and industry-education, establish a bridge for talent cultivation, discover and cultivate more scientific and technological talents, and promote the progress and development of China's robot industry. At the same time, the competition rules are the cornerstone of fairness, impartiality and openness of the event. They should be rigorous and detailed. The scientific nature and standardization of the review process should be strengthened to improve the credibility of the contest.

Liu Xiaoqing, deputy secretary-general of the Organizing Committee of the National 3D Contest and executive vice president of 3D Power.

Wang Feiyue delivered an online speech. He stated that the holding of the 3D Contest is of great significance. It is a worthy entry point for promoting the integration of industry and education and promoting social development. Through the method of promoting learning through competitions, it can truly stimulate the enthusiasm of teachers and students in various colleges and universities, deepen the understanding of professional knowledge, and shape disciplinary advantages. He hopes that this contest will further innovate in aspects such as event content setting and competition directions, empower disciplinary development, and promote the progress of industry-education integration.


Wang Feiyue, director of the State Key Laboratory of Management and Control for Complex Systems, researcher at the Institute of Automation, Chinese Academy of Sciences, and supervisor of the Chinese Association of Automation.


Na Jing, professor of Kunming University of Science and Technology's Faculty of Mechanical and Electrical Engineering, director of Institute of Intelligent Control for Complex Electromechanical Systems and Changjiang Scholar.


Li Weiguo said that the 3D contest is an important opportunity for college students across the country to learn and progress. Combining theory with practice and producing high-quality works with practical actions can not only promote students' progress but also provide more ideas for disciplinary development and social progress. Thanks to the 3D contest for helping students from various colleges and universities. Also, I wish this review meeting a success.

Li Weiguo, director of the National Experimental Teaching Demonstration Center and Engineering Training Center of Taiyuan University of Technology, and a member of the Engineering Training Teaching Steering Committee of the Ministry of Education.


Qi Haitao said that he is honored to participate in this review meeting of the 3D contest. The holding of the 3D contest is conducive to contributing to the rapid and continuous development of science and technology in our country, improving college students' innovative consciousness and creative ability, strengthening school-enterprise cooperation, promoting the deep integration of innovation chains and industrial chains, and enhancing students' digital innovation and multidisciplinary innovation, cultivating high-quality technical, applied, and compound talents. It is hoped that through this review meeting, the professionalism, innovation, and scientific nature of the event rules can be promoted, adding impetus to the successful holding of the scientific research-oriented events of the 3D contest.

Qi Haitao, deputy director of Engineering Training Center of Beihang University and deputy director of Virtual Teaching and Research Office of Engineering Training Courses of Ministry of Education.


Hu Shihao introduced the competition plan and event rules, covering aspects such as participants, competition content, equipment requirements, competition venue, task rules, and scoring standards. Among them, specific details involved in the coordinated crossing of unmanned aerial vehicles and unmanned vehicles and the task challenge of quadruped robots were stated one by one and explained. And experts were invited to analyze from a professional perspective to ensure the scientific rationality and practical feasibility of the competition plan and rules.

Hu Shihao, sales director of Shanghai Qingtong Vision Technology Co., Ltd.


Regarding the rules of this competition, various experts have conducted in-depth discussions and detailed evaluations. Fei-Yue Wang, director of the State Key Laboratory of Management and Control for Complex Systems; Jing Na, professor at the School of Mechanical and Electrical Engineering of Kunming University of Science and Technology and specially-appointed professor of the Changjiang Scholars Program; Weiguo Li, director of the Engineering Training Center of Taiyuan University of Technology; Haitao Qi, deputy director of the Engineering Training Center of Beihang University; Lili Fan, specially-appointed associate researcher of Beijing Institute of Technology; Guiyang Luo, associate researcher of Beijing University of Posts and Telecommunications; Zhiqiang Pu, researcher of the Institute of Automation, Chinese Academy of Sciences; Xuefeng Ren, chairman of Beijing Zhuoyi Intelligent Technology Co., Ltd.; Yonglin Tian, assistant researcher of the Institute of Automation, Chinese Academy of Sciences; Huachun Wu, director of the Engineering Training Center of Wuhan University of Technology; Xiangyu Wang, professor of the School of Automation, Southeast University; Zhijun Zheng, professor of South China University of Technology, spoke in turn on competition rules, technical support, scoring methods, and innovation directions. After extensive discussions and pooling of wisdom, the event process and event rule standards were finally agreed upon.

The experts attending the meeting had exchanges and discussions.


To ensure the uniformity and rigor of the rules, Hu Shihao issued a summary of the event rules based on the discussions and comments of experts and professors. He advocated empowering technological development, promoting disciplinary progress, and cultivating high-quality talents who can adapt to industry development. He optimized the event rules by making adjustments in specific details, actual scene planning, and requirements for competition equipment to guarantee the fairness and impartiality of the competition process as well as the rationality and feasibility of practical operations. This creates a good display platform for teachers and students participating in the competition, allowing them to fully release their potential and exert their innovative abilities.

The organizing committee of the 3D Competition signed a contract with Qingtong Vision.


Issue expert appointment letters.


This conference also held a signing ceremony. After the signing ceremony, Zhang Haiwei, the chairman of Shanghai Qingtong Vision Technology Co., Ltd., and Liu Xiaoqing, the deputy secretary-general of the organizing committee of the National 3D Digital Innovation Design Competition, issued appointment letters to various experts. They also invited expert representatives to come on stage to jointly launch the startup ceremony of the virtual scene creation and virtual simulation special competition and wished the competition a great success.

The special competition of virtual scene creation and virtual simulation (in the direction of robot motion control) of the 16th Anniversary Elite League of the National 3D Competition (2023-2024) is officially launched.

All the expert group members and leadership members attending the meeting took a group photo.

After the review meeting, the attending experts watched the performances carefully prepared by Qingtong Vision, such as drones crossing obstacles. The company's development history, product advantages and practical application scenarios were introduced in detail to the experts. The experts praised Qingtong Vision's motion capture technology and performances. They also expressed the hope that through this competition, people can further understand and recognize motion capture technology and take motion capture as a leverage point to promote the development of fields such as robot motion.


The attending experts watched the drone obstacle-crossing performance.


The special competition of virtual scene creation and virtual simulation of the National 3D Competition is divided into the directions of animation/virtual production/digital human live streaming and robot motion control. The competitions in the direction of animation/virtual production/digital human live streaming have been launched in Central China, South China and other places and have been warmly welcomed by teachers and students participating in the competition, who have actively signed up to participate. The successful holding of this review meeting will further expand the scale of the special competition and promote the progressive development of different majors and disciplines. As the technical support and co-organizer of the special competition, Qingtong Vision will continue to empower the competition, promote teaching through competitions, promote learning through competitions, promote application through competitions, and promote innovation through competitions. It will also promote school-enterprise cooperation, promote the development of industry-university-research cooperation, and enhance students' digital innovation and multidisciplinary innovation, cultivating high-quality technical, application-oriented and compound talents.




Contact us

CHINGMU is here to support your motion capture journey. We are happy to help you find the solution you need.

Contact our experts immediately